[ad_1]
Hello and welcome back to my 500 sqft studio apartment!! AND I’M HAPPY TO REPORT IT’S FINALLY FINISHED! I’ll be walking you through two of the fun DIYs I did for this space first, and then come back next week for the full reveal!! EEK! First, we’re starting with the bed wall that I’ve been in a boxing match with for years now. I was Rocky and this blank wall was Apollo Creed. But we went the distance babyyy and I think in this case I came out on top. Seriously though, I spent so much time scratching my head wondering how I could transform this back wall into something more interesting than the standard landlord white box special. After much trial and error, I finally figured out how to bring my vision to life!! So today I’m going to break down exactly how I did it in case you want to try this out at home, too, or if you don’t wanna try it out but you’re curious about the struggle that was this wall, let me entertain you 🙂
THE BEFORE
When I said this was a boring wall I meant it…and this is pretty much the main wall of the apartment (the other side of this room is the other main section which is where the second DIY that I’ll be showing you is) so design-wise, I knew this was the place to make a statement.
The Inspiration
This apartment is small and laid out pretty similarly to a hotel room, so when I was looking for inspiration the first place I went was cool hotels. I’m very much obsessed with Palm Springs vibes and style, so I popped into the Sands Hotel and Spa which was designed by Martyn Lawrence Bullard, and had lunch at the Pink Cabana during a weekend trip there. In case you haven’t been and have no clue what I’m talking about, let me show you some mediocre photos I took while visiting:
It’s SO fun right?? I was immediately blown away by the design (again shoutout to Martyn Lawrence Bullard!!) and knew I wanted to incorporate a touch of this fun, resort-y feeling in my space. So far, I haven’t been much of a “super bright colors in the main living space” kind of person (but this could also be because I live in 500 sqft), so I wanted to take pops of this but make it more restrained to be more livable in such a small space. Then when I saw this awesome custom headboard, I knew I could combine the two and create something really special.
The Options
So I started drafting up some options and you guys helped me decide on the direction (thank you!!). Here are some of the options we ran through:
A lot of you guys were split on which ones you liked, but there was a pretty solid pack that came together for option 6, and while it was easily the hardest version to complete, I agreed that it looked best (especially once the pendant lights came in!!) So now let’s chat about how to actually construct this baddie.
How To Create This Headboard Wall DIY
Okay, so now you wanna know how I did it, huh? Let me break down exactly how to do it (with some key learnings) so you don’t have to figure this out on your own (trust me, you don’t want to).
Items Needed
So here are the items you need. I used cardboard from boxes that I had and taped them together, but if you wanted to purchase cardboard I’ve got it linked for ya too! Also please note the amount for each item might change based on the size of your wall, but I’ll list how much I used for each item for my 10 ft wide x 8 ft tall wall:
- Wallpaper: 3 rolls
- Cane: 1 roll (could only purchase 40-inch wide cane in 50ft lengths lol) I ended up using about 20 ft and I have a TON left over which I’m planning to use for future projects (more on why this happened later)
- Black velvet fabric: 5 yards
- White painter’s tape: 3-5 rolls
- Double-sided tape: 5 rolls or more (I also just found this double-sided tape and wish I had used this instead…seems easier to apply!)
- 4 Art hooks
- Nails
- Batting: 5 yards
- Command strips
- Staple gun with lots of staples
- Scissors
- Hot glue gun and lots of hot glue
- Screwdriver
- Wood strips (long pieces that will be cut down –– I bought these in person at Home Depot! Get the thinnest ones you can find)
- 4″ Wide x10′ Long 1/4″ Thick neoprene: 2 rolls
- 1/4″ Thick X 12″ Wide X 54″ Long neoprene: 2 pieces
- Measuring tape
- Exacto knife
- Box saw
- Wallpaper scraper
Also in terms of timing, this project should take about 3 or 4 days in total (one or two days for the trim, one day for the cane, and another day for the wallpaper). There was a lot of trial and error.
Step One: Trace, Tape, And Cut Out The Cardboard Shape
So the first thing I did was hoard some cardboard boxes so I could create the shape for the black trim. Then I took a solid square of the cardboard and I traced the corner curve of my headboard so the trim would mimic the shape. I marked some points 4 inches below the curved line I traced and then traced another curve below it. Next, I cut this curve out and traced the exact shape onto another piece of cardboard then cut that one out. Boom. Now you have your curves! Next, I cut out a straight, long, piece of cardboard that was 4 inches wide and made it a little longer than the length of my headboard. I taped it together to the edges of my cardboard corners and used some command strips to put it onto the wall and see if the sizing looked right. Once I nailed down the top sizing, I cut out two more pieces to attach the bottom of the curves to the wall. I decided to give these a little curved moment too to make it feel really seamless and flowy. You’ll notice that a few photos down.
Step Two: Add Sticky Neoprene To One Side Of The Cardboard Trim To Secure It Together
Once I had taped the cardboard together I wanted something to make it feel more secure and a little more plush –– so I found this sticky neoprene foam on Amazon and I knew it was just the right thing!! I got the 4″ width so I wouldn’t need to cut it again (plus this would help the lines be a bit straighter because ya know…human error :))
Once the neoprene was up I used command strips and painter’s tape to put it onto the wall to make sure the shape looked right. Here’s what it looked like with just the neoprene up, before it was wrapped in fabric. The black helps you really understand where you’re at so you can adjust the shape if needed.
And then here’s what the finished result looked like before it was wrapped in fabric:
I ended up rounding the edges a bit on the bottom corners which I think gave it a better flow! This was the point where I ended day one (it was a doozy). If you wanna continue on and pull this out in one day YOU GO, GIRL. Please enjoy my grime-y outfit change…
Step Three: Hot Glue Wood Planks On The Back
Once I was happy with the shape, I needed something to really make the trim solid and to have something to staple the fabric to. So I had these poplar planks lying around and decided it would be the perfect thing. I ended up using about 10 long pieces (some of which I cut down with a box saw) and I hot glued a strip to the top and a strip to the bottom of the back of the trim. When it came to the curved corners, I cut down the wood pieces and glued them down to follow the curve (it’s not going to be perfect and that’s okay –– it’s really just to hold it all together).
Step Four: Staple Batting To The Wood Planks
Once the wood planks were locked in and the glue was dried, it was time to break out the staple gun and END THIS. If you’re attempting this DIY, this is the point where you’re gonna need a killer playlist and a little treat to keep going, but don’t worry there’s a light at the end of the tunnel, I PROMISE. At this point, I just laid out the batting and cut it to match the shape of the trim, then I pulled it tight and used a staple gun to wrap the trim. When it gets to the corners it’s all about going slowly and pulling really tight so it doesn’t crease. Check in on the other side frequently to ensure there aren’t any wrinkles!
This is an up-close shot of the corner (which is definitely the hardest part FYI). Take it slow so you can ensure there aren’t any wonky wrinkles happening in the front! Also, make sure to cut the batting so there’s still some of the wood exposed for the hooks coming in a second…
Step Five: Staple Velvet Fabric
Next up, I laid out my velvet fabric, cut it to match the shape (but make sure there’s lots of overage) and then I stapled it to the wood planks as well. Again, pulling tight each time you staple!! TAKE IT SLOW EVEN THOUGH YOU WILL BE QUESTIONING LIFE AT THIS POINT.
Step Six: Screw In Art Hooks And Add Command Strips
Next up was figuring out a way to hang this bad boy. I tried just using command strips to make this ultra-renter friendly, but then I decided I really don’t want a chance of this falling on my head in the night, so I opted for four art hooks (which I stole from a picture frame I had) and I screwed it into the wood.
Step Seven: Cut Cane To Size & Tape It Up With White Painter’s Tape
Now time for the cane!!! Finding a huge piece of cane was a real piece of work. At first, I used two 24″ wide pieces and it looked so janky. I then went on a WILD GOOSE CHASE to find a 40″ wide piece of cane (which is truly the widest they go). I had to go straight to the source and found an awesome manufacturer called Yeeya Home. They were so incredible to work with and the quality was far more premium than the shitty 24″ wide cane I had originally purchased on Amazon. They also sent samples of a bunch of different options –– I went for a radio weave and am absolutely obsessed with how it turned out!! Note: because I had to do a custom order I could only purchase a 50ft roll of cane which I thought was a ton (and it is) but I ended up using half of it and the other half I’ll save for my next project! It’s also nice to have some piece of mind in case something goes wrong and you cut it too short or something on accident. Here’s what it looked like installing the cane:
Now, you could lay it flat for a day or two if you have the space for it…I don’t so it was a little tough trying to lay it flush against the wall. I pushed the bed as close to the wall as possible which really helped to keep it in place, then I used white painter’s tape behind it to keep some of the other parts down and it worked pretty well. Note that I had to add in two smaller pieces of cane behind my nightstand because it didn’t go all the way to the floor, so for those pieces I used some small nails to keep them flush with each other. I also have an outlet down there so I cut the cane around it 🙂
Step Eight: Nail In Black Trim To Wall
Now it’s time to put that pretty trim (that I worked so hard to pull off) onto this wall. I used some command strips to make sure the placement was right and then nailed in four nails (two on the ends and two on the curved corners) and secured it in place.
Here’s what it looked like once it was up!!
Step Nine: Install Wallpaper
Now if you’re attempting this project, you could stop here OR you could keep going like I did and add a wallpaper. I fell in love with this wallpaper from Pottery Barn because it reminded me of the pink cabana in Palm Springs but the only problem was that it wasn’t peel-and-stick. So when I came across this article by Studio DIY a lightbulb went off and I added my dream wallpaper to cart!!! The gist is you put painter’s tape in a grid and then put double-sided tape over the painter’s tape so it becomes removable. I’d recommend grabbing a wallpaper smoother downer (yes, that’s the technical term) or a credit card to smooth it down as you go. Also, a huge lesson I learned was to A. use white painter’s tape if your wallpaper is thin or has a white background and B. line the painter’s tape grid up with the edges of the wallpaper so it looks more seamless and the edges won’t flip up. Then I just used the wallpaper smoother thing and an exacto knife to trim the edges and it worked wonders!! Lastly, I know painter’s tape isn’t technically supposed to be on a wall for long periods of time so we’ll see how removable this actually is when I move out (I’ll keep you posted), but it looks too good to not try 🙂
Step Ten: Revel In The Hard Work You Just Accomplished!
And just like that!!!! It took DAYS, WEEKS, MONTHS of trial and error but the finished result is so worth it!! This boring white box apartment isn’t so boring anymore!! Have a look!!!!!
I’ll be revealing the full space on Monday but I have one more DIY to share with you before then so stay tuned!!! More to come! Drop your comments/questions/concerns below and I’ll see ya down below or follow me on Instagram and TikTok! Thank you all for reading! xx
Opening Image Credit: Photo by Veronica Crawford
The post This Renter-Friendly Headboard Wall Completely Transformed This 500 Square Foot Studio Apartment appeared first on Emily Henderson.
[ad_2]
stylebyemilyhenderson.com
