[ad_1]
It’s always frustrating when your shower head starts to leak. But instead of dealing with the hassle of calling a plumber, you can try taking it apart and fixing it yourself. In this article, we will show you how to take apart a handheld shower head and clean it. We’ll also show you how to reassemble it and screw it back onto the pipe. Keep reading to find out more.
Image credit: https://www.sunrisespecialty.com/
When Would You Want To Take Your Handheld Shower Head Apart?
There are a few situations why you might want to take your handheld shower head apart. Maybe the water pressure is low, or there’s a lot of mineral buildup inside the shower head. Or, perhaps it’s starting to leak. Whatever the reason, taking apart your shower head and giving it a good cleaning can help improve its performance.
How To Take Apart A Handheld Shower Head
- Turn off the water supply to the shower head. This is usually done by turning a knob under the sink or behind the bathroom mirror.
- Unscrew the shower head from the pipe. You may need to use pliers for this step.
- Remove any screws or bolts that hold the shower head together. If there are none, you should be able to pull the shower head apart.
- Take apart the shower head and remove the rubber gasket. This is located between the shower head and the pipe.
- Clean any mineral buildup or dirt from the inside of the shower head. You can use a toothbrush and vinegar for this step.
- Reassemble the shower head and screw it back onto the pipe. Make sure that the rubber gasket is in place before doing this.
- Turn on the water supply and test the shower head.
Further Tips
- Be careful not to lose any small parts when taking your shower head apart. It can be helpful to put them in a bowl or cup so you don’t lose them.
- If your shower head is still leaking after you’ve cleaned it, you may need to replace the rubber gasket. You can find these at most hardware stores.
- If you have a lot of mineral buildup, you may need to soak the shower head in vinegar overnight before scrubbing it clean.
Taking apart your shower head is a simple process that anyone can do. By following the steps above, you can clean your shower head and get rid of any mineral buildup or dirt that’s causing problems. So next time your shower head starts acting up, don’t call a plumber—just take it apart and give it a good cleaning.
Removing The Flow Restrictor
While you are in the proces of cleaning your shower head, you may want to consider removing the flow restrictor. This is a small disc that limits the amount of water that comes out of the shower head. Removing it can increase the water pressure, but it will also use more water. So if you are concerned about conserving water, you may want to leave the flow restrictor in place.
To remove the flow restrictor, unscrew the shower head and look for a small black disc inside. This is the flow restrictor. You can remove it by gently prying it out with a screwdriver or other sharp object. Once it’s been removed, you can clean it and put it back in place, or discard it altogether.
One thing to consider is that you might end up wasting water if you remove the flow restrictor. If you have low water pressure, to begin with, removing the flow restrictor will only make the problem worse. So it’s important to weigh the pros and cons before making this decision.
How To Fix Shower Diverter Gate
Another problem that you might encounter with your handheld shower head is a diverter gate that is stuck in the “on” position. This can be caused by mineral buildup or dirt, and it can be very frustrating. Luckily, there is an easy fix for this problem.
To fix a stuck diverter gate, start by unscrewing the shower head and removing the diverter gate. Clean out any mineral buildup or dirt that is blocking the gate. You can use a toothbrush and vinegar for this step as well. Once the gate is clear, reassemble the shower head and screw it back onto the pipe. Turn on the water supply and test the shower head. The diverter gate should now be working properly.
Replacing The Shower Head
In a few rare cases, the problem with your handheld shower head may be that it needs to be replaced. This is usually only necessary if the shower head is old or damaged beyond repair. To replace the shower head, start by turning off the water supply and unscrewing the old shower head. Again, be careful not to lose any small parts in the process.
If you do end up going for a new shower head, check out the best handheld shower head on the market to get one that will work great and last long.
Image credit: https://www.homeadvisor.com/
Final Thoughts On How To Take Apart Handheld Shower Head
In conclusion, taking apart a handheld shower head is not difficult, but it is important to follow the proper steps to avoid damaging the fixture. Use these tips and you’ll be able to take your shower head apart with ease.
The post How To Take Apart Handheld Shower Head appeared first on Kitchen Infinity.
[ad_2]
kitcheninfinity.com
